ELP Laser Turntable
Specifications

 System  Contact-Free, 5 Beam Optical Record Player
 Function
     Play



     Pause
     Display
 Drawer system (Open/Close)
 Automatic lead-in, lead-out
 Programming (Max. 15 songs)
 Forward and back scan (2 speed)
 Forward and back search
 Cueing (Muting)
 Total, Elapsed, Remaining time
 Record size, Revolution
 Record Type  Black Records
 Drive System  Computer Controlled Belt-Drive system

 Revolution
 Speed Control


 Record Size
 LT-2XRC  LT-1XRC  LT-1LRC
 30 ~ 50rpm
 0.1rpm steps
 60 ~ 90rpm
 0.2rpm steps
 7",8",9",10",11",12"
 30 ~ 50rpm
 0.1rpm steps
 60 ~ 90rpm
 0.2rpm steps
 7",10",12"
 30 ~ 50rpm
 0.1rpm steps


 7",10",12"
 Frequency  20Hz - 25kHz
 Channel Separation  Depends on separation of Records
 >25 db (20 ~ 20,000Hz, DIN 45 543 Test Record)
 Output  Standard: Line Output (300mV = 0.3V)
 Note: Phono output can be ordered if preferred
 Phono output level: 3.2mV rms 5cm/sec 1kHz Lateral = MMLevel
 Distortion  <0.5% DIN45 543 1kHz Ref. Level
 S/N Ratio  >55db (Weighted) Ref. Level
 Wow & Flutter  <0.07% WRMS
 Output Terminal  RCA pin jacks
 Power Supply Voltage  100V 50/60Hz, 120, 220, or 240V Available
 Power Consumption  80W (Max.)
 Size  470mm(W) x 480mm(D) x 170mm(H)
 Weight  19kg

Additional Specifications:
The Laser Turntable connects to your pre-amp from outputs located under the FUNCTION switch, "MONO," "LEFT," "RIGHT." (Input impedance 47k ohm)

Remarks:
Design and specifications change with each upgrade.